Getting troubled since the Netgear Orbi router can’t connect to the modem? The Orbi router receives its input signals from the modem or DSL gateway. If the connection is not stable the Orbi won’t work properly. You will also experience the Orbi satellite not connecting issue. If you want to know the best effective solutions for this issue then reading this post will be helpful. All you need to do is read the post and apply the solutions. Let’s begin.
Let’s Get Orbi Router Connected to Modem
The Orbi router connects to the modem while the satellites connect to the router. Let us help you fix the mesh network so that you can begin enjoying WiFi.
1.Place the Devices Nearby
Did you place the networking devices far from each other? This could be the reason why they can’t get connected. We suggest you reduce the distance separating both devices i.e. the Orbi router and modem by bringing them closer to one another. As soon as they are close, they will easily communicate and hence get connected.
2.Use a LAN Cable
Interference in the signal can prevent the devices from connecting. In that event, you should make use of a LAN cable to join them. Cabled connections reduce the chances of signal dropping. We want you to grab a LAN cable and join the router to the modem using it.
But make certain that the cable that you have in your hand is in good condition. That means see that the cable is not damaged. Also, the connection that you are making should be well intact. Avoid making loose connections to get stuck.
3.Apply Sufficient Electricity
The chances of disconnection increase if the devices are not receiving proper electricity. For instance, if the modem itself is not fully booted up, how will it supply WiFi signals to the router? So, check the power supply to the devices now. Make sure that they are plugged into well working outlets. The power cable should also be inserted properly. Make no loose connections. A UPS can also be used if there are fluctuations in the power supply.
4.Power Cycle the Network
Perform a power cycle to give the network connection a fresh start. The process is simple if you apply it carefully. First of all, turn off the Orbi router and unplug it. Secondly, unplug the modem. Next, detach the LAN cable that’s connected to both devices. Now, wait for some time. It is now time you insert the LAN cable. Verify the connection and after 2 minutes, plug in to power on the modem. Finally, plug in your Orbi router after a gap of 2 minutes. Let the devices power on properly. The devices should be connected now. Access the orbilogin.net page to verify if you can log in or not.
5.Reset Orbi Router
By chance the Orbi router is still not connected to the modem, you should reset it. Resetting the Orbi router will restore the factory settings on it. The router will be as good as a new router. To perform the reset process, you’ll need a sharp and pointed object. Avoid using a pen or pencil to press the button. You can straighten a paper clip or use an oil pin. Press and hold the Reset button for about 10 seconds. Release the button when the Orbi blinks in amber color. The Orbi router is now reset. All the customized data is removed.
Make a LAN connection between the Orbi router and modem. Use the default Orbi admin login details now to carry out the setup process of the Orbi system. Use the Orbi app or the web browser method using orbilogin.net to get the task executed.
Wrapping Things Up
This way you can get your Netgear Orbi router connected to the modem by getting rid of the obstacles that stopped the connection. After making the connection and setting up your router, sync the Orbi satellites. As soon as the devices are set up, place them in different parts of the home. You can now connect your devices to the Orbi’s network and enjoy seamless internet.