Netgear rolls out the firmware updates for its devices on a regular basis. If you are trying to update the firmware on your Netgear N300 router but the process fails in between, then you need to address this issue as soon as possible so that you can get the router updated. Here we have taken Netgear N300 router as an example to help you resolve the firmware issue. But even if you do not have the Netgear N300 wireless router setup done and you own another router model, trust us, you can still rely on the same tips given in this guide.
What To Do If Netgear N300 Router Can’t Be Updated?
In case you are using the manual method to update the firmware on your router then firstly make sure that the firmware file that you have downloaded is meant for the router model that you own i.e. N300 router. Do not have the wrong file downloaded. All router models do not have the same firmware updates. Different models, different updates. Do not get confused. Check the router model number and then download the file. You will not face issues while uploading the right file.
If this is not the concern and there is something else that is stopping the firmware update process, then read ahead to learn more about it.
Restart the Netgear N300 Router and Retry
We recommend you reboot your Netgear router once and then again retry the firmware update process. Sometimes technical glitches stop the router from working well. Power off the Netgear router and power it on after some time. That’s it! Rebooting is done. Now, go ahead and try to get the firmware updated to the most recent version by logging in.
Do Not Interrupt the Process
While you are trying to update the firmware on your Netgear WiFi router, make certain that you do not do anything that interrupts the update. For example, if the update is taking time, do not power the router off. Wait for enough time and let the job complete. Also, do not open any new tabs or play games online.
Have a Non Fluctuating Power Supply
The power supply to the router has to be adequate and consistent. Why we are saying so because a poor power supply can also be the reason why the firmware process gets halted in between. The router should be fully booted up and powered on throughout the firmware update process. Examine the power cable and the power socket in use and make the required changes if you need to.
Take Care of Internet Connection
Consider a scenario that you are updating the firmware on your Netgear router by logging into it using the IP address 192.168.1.1. The internet connection however is not stable. What will happen? The firmware won’t get updated smoothly. The process will get stopped in between. This could be the reason why you are not able to get the job done.
We suggest you check the internet connection now. Also, check the connection between the router and the modem to ensure this. Fix any loose cables and then see if the firmware update gets done or not.
Reset the Router
If nothing works and the firmware is not getting updated by any means then you should reset the router to factory values. The firmware might have been corrupted somehow. Resetting helps in this case. You can reset your router by pressing the Reset button located inside the hole. Use a sharp and pointed object to do this. Upon resetting it, set it up once again.
The Closing Note
Now that you are done setting up your Netgear N300 router, you should try to update its firmware once again. But make sure that you are considering the points that have been discussed in this guide to avoid falling into a pit of issues once again.
Read more- Looking to Change Netgear Extender Login Password? Let’s Help!