Titan has always excelled in the painting industry through its best production and manufacturing. The paint sprayer of titan are known to be excellent. Titan advantage 440 is a multi purpose sprayer. Its golden qualities make it unmatched by any other paint sprayer. Enjoy yourself while paint-spraying!. The Titan Advantage 440 is the ideal tool for use in home, small commercial, and property care applications. In this blog, we will explore different solutions for the issues related to the Titan advantage 440.
Control Panel Indicators And The Innovative Solutions
The advanced features include the control panel indicator. The control panel indicators are describe as follows.
- Yellow Blinking
The pressure range for the Titan advantage 440 to operate in is 0 to 200 PSI while the pressure indicator is blinking yellow. A yellow pressure indicator that blinks indicates:
- The sprayer is switche on and plugge in; it is operating at priming pressure, which is low to nonexistent; and it is safe to switch the PRIME/SPRAY valve’s settings. Replacing or changing the spray tip is safe.
- When the pressure control knob is turned to a greater pressure and the PRIME/SPRAY valve is in the close position, and the pressure indicator starts to flash yellow.
- The sprayer require maintenance or repair, or the spray tip is worn.
Undiluted Yellow
In the range of 201 to 1900 PSI, the Titan advantage 440 operates when the pressure indicator is solid yellow. A yellow pressure indication that is solid means:
- The pressure on the sprayer is regulate correctly to apply stain, lacquer, varnish, and several colors.
- When the pressure is adjuste to begin at solid green and the indicator turns solid yellow, it signifies one of the following:
- The tip wear indicator turns bright yellow when high pressure or latex spraying is use. This indicates that it’s time to replace the worn-out tip.
- The pressure indicator will switch from solid green to solid yellow when a tip is inserted into the gun that is too large for the sprayer.
- Fluid Section Wear – service may be necessary (worn packings, worn piston, stoppe valve, etc.) if a soli yellow pressure indicator show while using a fresh tip and the pressure is set at maximum.
- Complete Green
The pressure range for the sprayer to operate in is 1901–3300 PSI when the pressure indicator is solid green. An unbroken green pressure indication denotes:
- The Titan advantage 440 sprayer is adjuste at the appropriate pressure to apply latex and oil-base interior paints. At a high pressure setting, the sprayer is performing at its best. Make sure there are no kinks in the paint hose and that nothing with sharp edges is in the way.
- Turn the pressure control to the lowest setting, turn the knob to “MIN.” Press the SPRAY button on the PRIME/SPRAY valve.
- To reach the maximum setting, turn the pressure control knob clockwise. The paint hose should tighten as paint begins to flow through it.
- Take the gun’s trigger lock off. To release the air from the hose, activate the spray cannon. Check the spray pattern by spraying a test area once the paint has reached the spray tip.
For the best spray pattern, use the lowest pressure setting that is require. The spray pattern will be too light if the pressure is adjuste too high. Too low of a pressure will cause tailing or cause the paint to splatter rather than spray finely.
Helping You In Understanding The Cleanup Process
Special cleaning recommendations for the Titan advantage 440 usage with flammable solvents:
- Always flush the spray gun ideally outdoors and at least one hose length from the spray pump.
- If gathering cleaned solvents in a metal one-gallon container, transfer the contents into an empty five-gallon container before flushing the solvents.
- Make sure the area is clear of combustible gasses.
- Comply with all cleaning guidelines.
- After every usage, the sprayer, hose, and gun need to be properly cleane. If this isn’t done material can accumulate and negative impact the unit performance.
- When cleaning the sprayer, hose, or gun with mineral spirits or any other solvent, always spray at the lowest pressure possible with the nozzle tip removed. An accumulation of static electricity might start a fire.
Important Tips To Avoid Any Problem
Spraying without the tip protection in place is not advise. Make sure the gun’s tip is in the spray or unclog position before triggering it. Make that the gun’s trigger lock is engage before removing, swapping out, or cleaning the tip.
When cleaning the sprayer, hose, or gun with mineral spirits or any other solvent, always spray at the lowest pressure possible with the nozzle tip removed. The accumulation of static electricity can cause an explosion or fire when combustible vapors are present.
Conclusion
In conclusion, the titan Advantage 440 has been designe to work efficiently and perfectly. But if you are facing any issue then there are a lot of simple and innovative solutions for it. The best thing is that the light indicator tells you that there is some issue going on. In this blog, we have explained what the light indicator indicates and what could be the best solution for it.