The Wavlink router is a simple plug-and-play device that boosts the signal and range of your current router. Even in WiFi dead zones, it enables your devices to receive the fastest possible internet speeds. 

Even though setting up the Wavlink Router is a straightforward procedure, the first time you do it could be challenging. However, the process will be made simple for you by our clear-cut steps. Step by step, read and adhere to the directions.

Get Ready For Setup By Gathering Some Pre-Requirements

Examine a few of the items you’ll need for the configuration process before going on to the next phase. These are listed below.

• Your Wavlink router and the login information for it.
• A router that connects to the internet.
• Any smartphone, computer, or laptop, moreover.
• Access to a web browser, too. 
• A wired connection requires an Ethernet cable.
• Lastly, a free electrical outlet.

These are the items you must have on hand in order to set up the router without difficulty. 

To Get A Better Signal, Keep Your Router Near The Repeater

Keep in mind and take into consideration a few useful suggestions in order to achieve a great range and signal. Look at them and use them correctly. 

• While performing the wifi.wavlink.com login process, you need to put the router close to the extender. 
• Keep other electronics from making contact with the router.
• Additionally, keep metal objects far from your router to prevent signal interruptions. 
• Check the router’s LED while you’re working to analyze the connection and any other notifications.

Once your router has been configured, you can move it to a new location for the best internet speed. But make sure the router is within the router’s permitted range.

Connect The Router To The Electrical Outlet

Start the process by plugging the router into an electrical outlet and turning it on. The router must be set up-ready if the LED is lit. Use your device, however, to establish the connection. Select the appropriate network from the list of WiFi networks on your mobile. After that, enter the Wavlink router password and select Connect.

Take an Ethernet wire if you want to establish a wired connection. We would rather use a brand-new or fully functional Ethernet cable in this situation. Connect the router’s ethernet wire by inserting one end into one port and the other end into the other port. You will always obtain a perfect signal if you connect using an Ethernet connection. Therefore, choosing a wired connection is preferable. 

Utilize The WPS Feature To Install Your Router

Using the WPS feature of the router, you can configure the Wavlink AC1200 Setting up using this way. But the WPS button on your current modem is a requirement. Read the remaining points after plugging in the router. Go to the following step as soon as you are confident that the router is prepared for setup.

• First, find the WPS button on the router and press it for a few seconds. 
• Push the WPS button on the modem in the following two minutes. 
• Allow the router to establish the connection while you are away. 
• The LED on the router will change color after a while to show that the connection was successful.
• You may easily configure your router in this manner.

Once you are sure that the router is ready for setup, move on to the next step.

Configure The Router Using The Website’s Setup Page

You can choose the web-based setup page technique in addition to the WPS technique or if you cannot use the WPS function. Connect your device to an ethernet wire or a WiFi network to accomplish this. Use these guidelines to continue after that.

• Use any web browser on your connected device to launch it. 
• Next, enter the router’s default web address in the search box.
• The default website address in this case is wifi.wavlink.com.
• Put this address into the search box, then select Enter. 
• This will therefore link you to the router’s wifi.wavlink.com login page. 
• Create a secure Wavlink router login username and password for your router on that page. 
• After that, complete a few simple tasks and enter the router’s crucial information to complete the configuration. 
• The setup will be finished and the router will be ready to use once you’ve done this. 

Solutions For Wavlink Router Setup Issues

• Simply check your wireless connection.
• After that, examine the router’s settings.
• After that, simply verify the router’s firmware.
• Verify the router’s security settings.
• Inquire about the router’s firewall settings.
• View the host configuration on the DHCP router.
• A DHCP server on your network is responsible for providing an IP address and default gateway to the Internet Protocol (DHCP) client.

In order to improve the current internet connection, you will be able to do so after establishing the Wavlink router set up in your residence or place of business. You will notice that the router is operating and performing better after the wifi.wavlink.com login and setup. Utilizing our straightforward advice, you can complete the process without any hassle. If you have any issues, please get in touch with us to solve them. You may also read about how to resolve the Wavlink AC1200 setup quickly.